If printing is continued when the remaining ink level is below the lower limit line, the printer may consume a certain amount of ink to return to printable status and may also become damaged. If ink does not reach the upper limit line, the remaining ink level is not detected correctly. G2000 series; Handling Paper, Originals, Ink Tanks
Make settings in Printer printing Preferences when necessary. 2.[Windows 11,Windows 10] Layout printing from the OS standard print settings screen may not be performed as expected in Some instances. In such cases, open the Printer Printing Preferences window and change the paper size accordingly.
Download the file. For the location where the file is saved, check the computer settings. 2. Double-click the downloaded .exe file. It will be decompressed and the Setup screen will be displayed. Follow the instructions to install the software and perform the necessary settings. File information. File name : win-g2000-1_1-n_mcd.exe.Step3 Clean the print head again. After cleaning the print head again, print the nozzle check pattern and check the result. If it still does not improve, go to the next step. Step4 Clean the print head deeply. After cleaning the print head deeply, print the nozzle check pattern and check the result. From the printer. Cleaning the Print Head Deeply
Hey, I had some problems with my old canon printer (IP4200 in my case) connecting to my windows 10 computer, windows kept detecting an "inkjet printer" but said "driver is unavailable". The printer previously worked on a Windows 10 set-up but, following a clean reinstall of Windows 10, the printer could not be found during install. The
Turn off the power of the printer and disconnect the power plug from the outlet. Open the feed slot cover. Fold one A4 sheet in half and insert it horizontally into the rear tray. Insert the paper so that your hand does not directly touch the part in the center of the rear tray when removing the foreign object.
Open the Scanning Unit (Printer Cover) and check the ink lamps. If the ink lamp is not lit, press the mark on the ink tank until it clicks into place. The ink lamp lights up red when the ink tank is fully inserted. 1. Open the printer properties dialog box. 2. Click the Maintenance tab and then View Printer Status.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing Is Faint or Uneven. Watch the movie. If nozzle check pattern is not printed correctly: After performing the print head cleaning, print the nozzle check pattern and examine the pattern.Make sure that the power is turned on. Load a single sheet of A4 or Letter-sized plain paper in the rear tray. Pull out the paper output tray, then open the output tray extension. Hold down the Stop button until the Alarm lamp flashes eight times, then release it immediately. The print head alignment sheet will be printed.
Check1 Check paper and print quality settings. Print Results Are Unsatisfactory. Check2 Print nozzle check pattern and perform any necessary maintenance operations such as print head cleaning. Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
Unplug the printer and wait about 1 minute. Hold down the "On" button and simultaneously reconnect the power cord. If the restart procedure to work, your Canon printer should turn back on. If not, it is highly likely that a problem in the power supply circuit be the cause. To check it, perform the following operations.rNX7f.
